ALL libraries (COBIB.SI union bibliographic/catalogue database)
13.
Analiza uticaja nastanka delta ferita kod zavarivanja nerđajućih austenitnih čelika [Elektronski vir]
Zupanc, Uroš ; Samsa, Nikolaj
As to the purpose austenitic stainless steels are the most widely used stainless steels. In welding possible changes in the microstructures of a weld and a heat-affected zone (HAZ) may due to several ...factors. The paper deals with an analysis and experimental verification of key factors affecting the formation of delta ferrite in the weld since the latter strongly affects the mechanical properties and corrosion resistance of the weld. Experiments were carried out on two different plates, i.e. one made of stainless steel 304 and one of steel 316 L. The influence of heat input provided in TIG remelting of a surface using pure argon but no filler material on an increase in ferrite phase was analysed. Further changes of delta ferrite in the weld and HAZ were analyzed using MAG welding with different filler materials, i.e. 308LSi, cored wire 316LTO, and 904L. For shielding gas mixture of 90% Ar, 5% N2 and 5% CO2 was used. Measurements of delta ferrite were carried out with a ferritoscope and then statistically processed.
It was not necessary to add the material to the shelf.
Bibliographic material was successfully added on shelf.
Adding bibliographical material on shelf was not successful.
Material is already on the shelf.
Permalink
URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year
Impact factor
Edition
Category
Classification
JCR
SNIP
JCR
SNIP
JCR
SNIP
JCR
SNIP
Select the library membership card:
DRS,
in which the journal is indexed
Database name
Field
Year
Links to authors' personal bibliographies
Links to information on researchers in the SICRIS system
Subject headings in COBISS General List of Subject Headings
Select pickup location
The material from the parent unit is free. If the material is delivered to the pickup location from another unit, the library may charge you for this service.
