-
Surface integrity of heat treatable magnesium alloy AZ80A after cavitation peeningŽagar, Sebastjan, strojnik ...The present paper aims to investigate topographical behavior of precipitation hardened magnesium alloy AZ80A subjected to cavitation peening. The introduction of surface residual compressive stress ... is the main feature of this new method, which is different from the traditional mechanical processing method and is also the key factor leading to the good service performance of the metal material surface. The tested material was heat treatable magnesium alloy AZ80A. Magnesium alloys have the lowest density among the common non-ferrous alloys and so are very important in reducing the weight and are used in many fields, including aviation, aerospace, electronics and automobile industries. After heat treatment of the magnesium alloy, cavitation peening was performed, which in all cases raises the surface hardness of the specimens. Cavitation peening also has a beneficial effect on compressive residual stresses, as they increase in all cases. It should be noted that in all specimens throughout the entire measurement depth the residual stresses stayed in compressive nature. They are especially expressed in the case of artificial aging, where we also achieve the maximum stress on the specimen surface in the amount of −220 MPa. The most negative thing about such a process is the surface roughness after cavitation hardening as it is greatly increased in all cases.Source: Journal of Materials Research and Technology. - ISSN 2238-7854 (Vol. 17, Mar./Apr. 2022, str. 2098-2107)Type of material - article, component partPublish date - 2022Language - englishCOBISS.SI-ID - 97813507
Author
Žagar, Sebastjan, strojnik |
Soyama, Hitoshi |
Grum, Janez, 1946- |
Šturm, Roman, 1965-
Topics
magnesium alloy AZ80A |
cavitation peening |
artificial ageing |
residual stresses |
microhardness |
surface roughness |
microstructure |
magnezijeva zlitina AZ80 |
kavitacijsko utrjevanje |
umetno staranje |
zaostale napetosti |
mikrotrdota |
površinska hrapavost |
mikrostruktura
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|---|
Žagar, Sebastjan, strojnik | 30568 |
Soyama, Hitoshi | |
Grum, Janez, 1946- | 03551 |
Šturm, Roman, 1965- | 13026 |
Select pickup location:
Material pickup by post
Notification
Subject headings in COBISS General List of Subject Headings
Select pickup location
Pickup location | Material status | Reservation |
---|
Please wait a moment.