VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
Optimisation of PLA filament consumption for 3D printing using the annealing method in home environmentDjukanović, Milena ...The idea for this paper came with the outbreak of the Covid-19 pandemic when almost all countries started experiencing shortages of different, previously abundant, materials. As with all other ... communities, these shortages prompted the 3D printing community to become more involved in the global fight against the Covid-19. This fight was further facilitated by a large number of world-famous companies which provided their 3D models of protective masks, visors, and other aids to medical staff free of charge together with the recommended parameters and open-source files used for their printing. The idea of these companies was to support their countries by providing protective equipment for everyone who sorely needed it, especially at the beginning of the pandemic, but this mass 3D printing led to a shortage of 3D printing filaments. One of the main ideas behind this paper is to show that this problem can be drastically reduced by optimising filament consumption when printing those models. One way of doing this is strengthening the printed element by annealing it, which is the topic of this paper. By strengthening it afterwards, one could reduce filament consumption by reducing the infill percentage in the G code creation procedure. For this research, we opted for a polylactide acid (PLA) filament, because it is the most widely used 3D printing material. By varying its annealing temperature and time, and testing it, the results gave us an optimal procedure for strengthening the PLA prints, as well as an optimal solution for consumption reduction that would be the most suitable during material shortages. These results could be of great significance if applied globally.Vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 68, no. 3, Mar. 2022, str. 185-190)Vrsta gradiva - članek, sestavni delLeto - 2022Jezik - angleškiCOBISS.SI-ID - 105875971
vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 68, no. 3, Mar. 2022, str. 185-190)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Djukanović, Milena | |
Damjanović, Milanko | |
Radunović, Luka | |
Jovanović, Mihailo, strojnik |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: