VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
The Stribeck curve and lubrication design for non-fully wetted surfacesKalin, Mitjan ; Velkavrh, Igor ; Vižintin, JožeTailoring the properties of tribological interfaces is difficult, but it can be a very efficient way to reduce wear and friction and so increase service life - providing it can be done successfully. ... However, when considering the interface properties it is necessary not only to take into account the solid-solid contacts, we also need to consider the solid-liquid interfaces, which can have a very significant impact on the micro- and macro-contacts, andwhich cannot be neglected. In this investigation we show that it is essential to consider the wetting, or slip, properties of the non-fully wettedsurfaces when designing the lubrication, and that this is also to a large extent predictable and relatively simple to implement. We discuss the differences between several types of contacts, using steel and DLC as model materials for fully wetted and non-fully wetted surfaces, respectively. We studied steel/steel, steel/DLC and DLC/DLC pairs, and we present the experimental evidence for how the Stribeck curve changes if one or two surfaces in the contact are non-fully wetted. Firstly, in the EHL regime the friction of non-fully wetted surfaces decreases significantly; in our case by around 15% and by more than 20%, respectively, while at minimum friction (the EHL > ML transition) the reduction in friction is lower, but still about 6%, and as high as 9%. Secondly, the film thickness of the non-fully wetted contacts is reduced, which causes a shift in the minimum friction (the Stribeck curve) to higher v/F values. This suggests a lower bearing capacity for these contacts and the potential danger of a transition in the lubricationregime and, as a result, increased wear. However, we have derived several "ready-to-use" diagrams that are generally valid for any oil and surface properties and which allow us to define the film thickness, the lambdaparameter and the regime transition for different wetting/slip properties. These diagrams can be used directly to improve the prediction and design of the lubrication quality and the regimes of the macro-scale contacts by employing a currently used, conventional methodology and equations. Moreover, based on the experimental results and the "ready-to-use" diagrams derived in this investigation for non-fully wetted contacts, the slip at the solid-liquid interface, i.e., the DLC-PAO oil, was estimated independently from the data of two Stribeck curves to be about 20%.Vir: Wear. - ISSN 0043-1648 (Vol. 267, issues 5-8, 15. jun. 2009, str. 1232-1240)Vrsta gradiva - članek, sestavni delLeto - 2009Jezik - angleškiCOBISS.SI-ID - 10955035
Avtor
Kalin, Mitjan |
Velkavrh, Igor |
Vižintin, Jože
Teme
wetting |
slip |
oils |
DLC |
Stribeck |
Lambda |
DLC prevleke |
olja |
mazanje |
trenje |
tribologija
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Kalin, Mitjan | 14556 |
Velkavrh, Igor | 28613 |
Vižintin, Jože | 00812 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: