VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
  • Optimization of tuned mass damper location for enhanced chatter suppression in thin-wall milling
    Selvakumar, Mohanraj ; Venugopal, Prabhu Raja ; Velayudhan, Gautham
    In this paper, a method to optimize the location of tuned mass damper (TMD) for enhancing chatter stability limits of thin-walled workpiece by using numerical techniques is proposed with due ... consideration to mass effect of TMD. The dominant mode of workpiece is identified from the simulated and measured frequency response functions of the workpiece. Two TMDs each having single degree of freedom are designed and a finite element model to predict the response of the workpiece-damper system is developed. The effect of damper location on the chatter stability of the thin-walled workpiece is investigated. Further, the locations for TMDs are optimized for enhanced chatter stability of workpiece by using response surface methodology. Milling tests were performed on workpiece with and without TMDs. A three-fold improvement in minimum stable depth of cut is realized after incorporating the TMDs at their optimal locations on thin-walled workpiece.
    Vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 68, no. 5, 2022, str. 339-349)
    Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasle
    Leto - 2022
    Jezik - angleški
    COBISS.SI-ID - 111032323

    Povezava(-e):

    https://www.sv-jme.eu/sl/article/optimization-of-tuned-mass-damper-location-for-enhanced-chatter-suppression-in-thin-wall-milling/
    Repozitorij Univerze v Ljubljani – RUL
    Digitalna knjižnica Slovenije - dLib.si
    DOI

Vnos na polico