-
Powder particle–wall collision-based design of the discrete axial nozzle-exit shape in direct laser depositionJeromen, Andrej, 1975- ...To improve the efficiency of the direct laser deposition (DLD) of metal powders, a concentrated powder-stream distribution is required, which can be affected by the shape of the powder-delivery ... nozzle. In this study, a simplified, powder particle–wall collision-based 3D numerical model of the powder flow in the nozzle was used to simulate the influences of the nozzle-exit shape on the concentration of the powder stream distribution, characterized by its diameter. The nozzle-exit shape was parametrized by the exit-cone angle, length, and inner-surface roughness. Based on the simulation results, the nozzle-exit shapes of three exit-cone angles (0°, 3.5° and 7.2°), various lengths and surface-roughness values were designed. For the two larger particle sizes of 22 μm and 82 μm considered, the wall-collision-dominated regime and the influence of the nozzle-exit shape were experimentally confirmed. In particular, a significant decrease in the powder-stream diameter when increasing the divergent nozzle-exit cone angle or decreasing its surface roughness and the nonlinear influence of the cone length were shown. Using single-layer, powder-deposition experiments it was demonstrated that by modifying the design of the nozzle-exit shape, the powder-catchment efficiency was increased by 13% due to the increased nozzle-exit cone angle and by 19% due to the reduced surface roughness.Vir: Journal of materials processing technology. - ISSN 0924-0136 (Vol. 308, Oct. 2022, str. 1-13)Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasleLeto - 2022Jezik - angleškiCOBISS.SI-ID - 114823683
Avtor
Jeromen, Andrej, 1975- |
Vidergar, Ana |
Fujishima, Makoto |
Levy, Gideon N. |
Govekar, Edvard
Teme
direct laser deposition |
axial nozzle shapes |
wall-collision-dominated flow |
powder-stream distribution |
powder-catchment efficiency |
neposredno lasersko nanašanje |
aksialna oblika šob |
trčenje sten v prevladujočem toku |
porazdelitev toka prahu |
učinkovitost zajemanja prahu
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Jeromen, Andrej, 1975- | 20270 |
Vidergar, Ana | 50588 |
Fujishima, Makoto | |
Levy, Gideon N. | |
Govekar, Edvard | 08782 |
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Obvestilo
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Mesto prevzema | Status gradiva | Rezervacija |
---|
Prosimo, počakajte trenutek.