VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
Comparison of the effects of the lubricant-molecule chain length and the viscosity on the friction and wear of diamond-like-carbon coatings and steelVelkavrh, Igor ; Kalin, MitjanFor steel contacts it is usual for the longer molecular chain lengths of saturated linear hydrocarbons and their acids and alcohols to reduce the coefficient of friction in the boundary-lubrication ... regime. However, the effect of these lubricant properties on DLC contacts is still unknown. Since the boundary- lubrication mechanisms between DLC coatings and conventional additives do not appear to be as effective as with metals, other potential mechanisms, even though based on weaker interactions or the oilʼs physical andrheological properties, may thus be very relevant. In this study we focus on the influence of the base oilʼs chain length and viscosity on the friction and wear in DLC/DLC contacts, and we compare this behaviour with conventional steel/steel contacts, using several simple linear hydrocarbons, i.e., alkanes, and complex branched hydrocarbons, i.e., polyalphaolefins. The results show that in both the steel/steel and DLC/DLC contacts the wear decreases with a longer molecular chain length and a higher viscosity of the oil. However, in DLC/DLC contacts the coefficient of friction increases when oil with a longer molecular chain length or a higher viscosity is used, and decreases with the lower oil viscosity and shorter chain lengths, which is just the opposite to conventional steel/steel behaviour. These results are analysed and discussed in view of lubricant cohesive energy, surface tension, shear strength, viscosity and chain length.Vir: Tribology international. - ISSN 0301-679X (Vol. 50, 2012, str. 57-65)Vrsta gradiva - članek, sestavni delLeto - 2012Jezik - angleškiCOBISS.SI-ID - 12266267
Avtor
Velkavrh, Igor |
Kalin, Mitjan
Teme
diamond-like carbon |
DLC |
oil molecular chain length |
viscosity |
cohesive energy
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Velkavrh, Igor | 28613 |
Kalin, Mitjan | 14556 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: