VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
Parameters influencing the running-in and long-term tribological behaviour of polyamide (PA) against polyacetal (POM) and steelPogačnik, Aljaž, 1985- ; Kalin, MitjanThis work focuses on a study of the parameters affecting the running-in and long-term behaviour of plastic/plastic and plastic/steel contacts at sliding distances sufficiently long to ensure ... steady-state sliding conditions, which is very important for an evaluation of the performance in real-scale applications. Unreinforced polyamide (PA6) was paired against stainless steel and against unreinforced polyacetal (POM). The effect of the sample roughness (0.2 and 0.65 um Ra) and sliding velocity (0.1, 0.5 and 1 m/s) was studied at a constant nominal pressure of 0.7 MPa. In addition, the contact conditions were carefully controlled with measurements of the upper specimen surface temperatures using an infrared camera. The results show that the running-in sliding distances to reach steady-state conditions are much longer for the PA6/POM contacts (up to 45 km) than for the PA6/steel contacts (up to 20 km). For the PA6/steel contact the surface roughness has a significant effect on the coefficient of friction, the sliding distances to steady-state and on the wear mechanisms, while for PA6/POM the effects of these parameters are less influential. For the smooth PA6/steel contacts a transfer film forms on the steel surface, causing adhesion wear, while for the rough steel surface, abrasive wear is dominant. For the PA6/POM contacts, plastic deformations with local melting occur on the PA6 surface at high speeds, mainly due to the poor heat conductivity of the plastic materials, which did not occur at the lower velocity, nor when used against the steel surfaces.Vir: Wear. - ISSN 0043-1648 (Vol. 290-291, 2012, str. 140-148)Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasleLeto - 2012Jezik - angleškiCOBISS.SI-ID - 12348699
Avtor
Pogačnik, Aljaž, 1985- |
Kalin, Mitjan
Teme
polymers |
gears |
running-in |
sliding wear |
sliding friction |
polimeri |
zobniki |
drsna obraba |
drsno trenje
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Pogačnik, Aljaž, 1985- | 33437 |
Kalin, Mitjan | 14556 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: