-
Influence of friction riveting parameters on the dissimilar joint formation and strength [Elektronski vir]Klobčar, Damjan ...Friction riveting represents a promising technology for joining similar and/or dissimilar materials of light-weight components. However, the main drawback of the technology is that it is primarily ... used only with special machines for friction welding that have a force control. In this study we used accessible CNC machines with a position control. A set of friction riveting experiments was performed to establish the relationship between the processing parameters, the rivet formation and its mechanical strength. During the manufacturing process, the axial force and torque were constantly measured. The fabricated joints were examined using an X-ray imaging technique, microstructural analyses, and mechanical tests. The samples were subjected to the pull-out test to analyse the joints’ strength and determine the failure mode type. In addition, a correlation between the friction riveting processing parameters, the rivet penetration depth, the rivet shape and the joint strength was established. The results depict that a higher axial force in the first production phase at the higher feeding rate increases the penetration depth, while in the second phase at lower feeding rate, an anchoring shape of a rivet forms.Vir: Materials [Elektronski vir]. - ISSN 1996-1944 (Vol. 15, iss. 19, Sep. 2022, str. 1-12)Vrsta gradiva - e-članekLeto - 2022Jezik - angleškiCOBISS.SI-ID - 123842051
Avtor
Klobčar, Damjan |
Pušavec, Franci |
Bračun, Drago |
Garašić, Ivica |
Kožuh, Zoran |
Vencl, Aleksandar |
Trdan, Uroš
Teme
torno kovičenje |
2024‐T351 Al zlitina |
PEI polimer |
rentgensko slikanje |
digitalna radiografija |
izvlečna sila |
friction riveting |
2024-T351 aluminium alloy |
PEI polymer |
X-ray imaging |
pull-out force
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Klobčar, Damjan | 20441 |
Pušavec, Franci | 26559 |
Bračun, Drago | 18327 |
Garašić, Ivica | ![]() |
Kožuh, Zoran | ![]() |
Vencl, Aleksandar | ![]() |
Trdan, Uroš | 28906 |
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Obvestilo
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Mesto prevzema | Status gradiva | Rezervacija |
---|
Prosimo, počakajte trenutek.