VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
Properties of a metalnonmetal hybrid joint with an improved shape of the metal insert [Elektronski vir]Miklavec, Matej, 1984- ...A vehicle's brake pedal transfers the force from a human being to the braking mechanism, and as such is considered as a safety component in the vehicle. In the past, vehicle weight-reduction ... initiatives resulted in a highly optimised design of steel brake pedal with an increased strength-to-weight ratio. However, any further reduction in the weight of the brake pedal is only possible by using combined, that is hybrid, materials. Hybrid technologies enable the design of lighter and cheaper brake pedals within the strict limits of the safety and technical requirements. This article presents an example of an innovative mechanical joint with a metal insert moulded into a polymer base structure that could be applied for a brake-pedal design. The metal insert contributes the required strength, while the polymer part provides the final form. However, the design of the metal insert not only provides the strength of the component, but also ensures the proper bonding of the metal-to-polymer joint. This article presents a comparison of the strength for simple and optimised forms of the metal insert within the hybrid joint. The strength comparisons were performed using numerical simulations, which were also experimentally validated.Vir: Experimental techniques [Elektronski vir]. - ISSN 1747-1567 (Vol. 39, iss. 1, Jan./Feb. 2015, str. 69-76)Vrsta gradiva - e-članekLeto - 2015Jezik - angleškiCOBISS.SI-ID - 12583707
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Miklavec, Matej, 1984- | 33825 |
Klemenc, Jernej | 16334 |
Kostanjevec, Andrej, konstruiranje | 19240 |
Fajdiga, Matija | 00819 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: