VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
  • On acoustic very near field measurements
    Prezelj, Jurij, strojnik ...
    Information about vibration modes is needed during the planning of noise control measures on different parts of machinery. A visualization of vibration modes is a starting point and different methods ... can be used to visualize vibration modes. Some methods which incorporate an inverse calculation of surface velocity from the sound pressure on some boundary have already been proposed, among others. A direct inverse method based on the discretized Rayleigh integral was used in our work, to demonstrate that microphones should be placed close to the vibrating structure to provide an acoustic transfer matrix with a low condition number. It is demonstrated, that there is practically no need for the calculation of the inverse matrix if microphones are placed in a very near field of the vibrating structure. A single microphone placed in a very near field together with a reference vibration sensor provides sufficient information for producing the images of vibration modes. Analytical results, numerical results, FEM simulations and measurement results were used to prove that properties of the sound pressure in a very near field permit a cost effective visualization of the vibration modes.
    Vir: Mechanical systems and signal processing. - ISSN 0888-3270 (Vol. 40, no. 1, Oct. 2013, str. 194-207)
    Vrsta gradiva - članek, sestavni del
    Leto - 2013
    Jezik - angleški
    COBISS.SI-ID - 13042203

    Povezava(-e):

    http://www.sciencedirect.com/science/article/pii/S0888327013002069

    Dostop omejen z geslom



Vnos na polico