-
Effects of plasma electrolytic polishing on SLM printed microfluidic platformSabotin, Izidor ...Additive manufacturing (AM) of metallic parts is gaining momentum in production industries. In view of producing a metal microproduct using AM the issue of high surface roughness is prominent. Plasma ... electrolytic Polishing (PeP) is a post processing technology that greatly reduces surface roughness of metallic parts. In this paper the effects of PeP of microfluidic platform, printed with selective laser melting (SLM) technology, is presented. The results show that surface roughness of the specimens was severely reduced. Also, some geometrical defects inherent to SLM technology were partly removed. It is shown, that for smaller geometrical microfeatures (sizes of less than 0.5 mm) the effectiveness of PeP is reduced. Through this investigation it can be concluded that PeP is a promising post-processing technology for SLM printed microparts since it significantly improves the overall part quality. However, further improvements of the process chain need to be implemented in order to render the microfluidic platform functional.Vir: Advanced technologies and materials. - ISSN 2620-0325 (Vol. 47, nr. 1, 2022, str. 19-23)Vrsta gradiva - članek, sestavni delLeto - 2022Jezik - angleškiCOBISS.SI-ID - 132569603
Avtor
Sabotin, Izidor |
Jerman, Marko, strojnik |
Lebar, Andrej, strojnik |
Valentinčič, Joško |
Böttger, Toni |
Kühnel, Lisa |
Zeidler, Henning, strojnik
Teme
selective laser melting |
plasma electrolytic polishing |
microfluidics |
additive manufacturing |
selektivno lasersko taljenje |
plazemsko elektrolitsko poliranje |
mikrofluidika |
aditivne tehnologije
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Sabotin, Izidor | 30912 |
Jerman, Marko, strojnik | 33239 |
Lebar, Andrej, strojnik | 12260 |
Valentinčič, Joško | 18553 |
Böttger, Toni | |
Kühnel, Lisa | |
Zeidler, Henning, strojnik |
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Obvestilo
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Mesto prevzema | Status gradiva | Rezervacija |
---|
Prosimo, počakajte trenutek.