VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
Powder-mixed electro-discharge diamond surface grinding process : modelling, comparative analysis and multi-output optimisation using weighted principal components analysisModi, Manoj ; Agarwal, GopalPowder-mixed electro-discharge diamond surface grinding (PMEDDSG) is an efficient process for shaping hard materials, such as Ti-6Al- 4V. Modelling, comparative analysis to study the behaviour of ... input variables against the responses for both processes, determination of optimum combination of parameters, and studying the effect of input variables on white recast layer thickness and finally on different surface generation during the PMEDDSG processing of Ti-6Al-4V are reported in this paper. The response surface methodology was used to develop the mathematical models of both the responses. Thirty-one experiments were performed on the PMEDDSG set-up without powder-mixed dielectric fluid. Another thirty-two experiments were performed on the PMEDDSG set-up with aluminium powder-mixed dielectric fluid. The current, pulse-duration, wheel-speed, duty-cycle and powder-concentration (considered only as an input variable with the powder-mixed dielectric fluid) were taken as input parameters. The material-removal-rate (MRR) and average-surface-roughness (Ra) were measured as responses in both the process. The weighted principal components (WPC) analysis has been applied to find an optimum setting of PMEDDSG process parameters during multi-output optimisation. A total of 18 experiments were performed according to Taguchi L18 orthogonal-array on the PMEDDSG set-up. The optimum combination suggested by the WPC method was tested to obtain the optimum values of MRR and Ra. The scanning electron microscopy images showed that the surface view and white recast layer thickness of machined workpieces are largely influenced by ampere-current, pulse-duration, duty-cycle, wheel-speed and powder-concentration.Vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 59, no. 12, Dec. 2013, str. 735-747, SI 151)Vrsta gradiva - članek, sestavni delLeto - 2013Jezik - angleškiCOBISS.SI-ID - 13279515
![loading ... loading ...](themes/default/img/ajax-loading.gif)
vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 59, no. 12, Dec. 2013, str. 735-747, SI 151)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Modi, Manoj | ![]() |
Agarwal, Gopal | ![]() |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: