VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
The transition to a clean, dry, and energy efficient polishing process : an innovative upgrade of abrasive flow machining for simultaneous generation of micro-geometry and polishing in the tooling industryPušavec, Franci ; Kenda, Jani, 1981-On account of the current different requirements in the field of finishing/polishing, e.g., reducing the finishing time, process control, ensuring a clean process, and energy efficiency, hand ... polishing needs to be replaced with a superior process. One alternative is abrasive flow machining (AFM). In comparison with hand polishing, AFM is an efficient process, suitable for finishing external as well as internal surfaces, which are often complex and out of reach. Due to the drawbacks of AFM, in this work a novel method of abrasive flow machining with a movable mandrel (AFMmm) is proposed and introduced through a case study from the automotive industry. As in the manufacturing sector electric power consumption is the main driver that influences CO2 emissions, a comparative analysis of the energy efficiency of AFM vs. AFMmm is performed. The results of this work show that the application of the novel AFMmm method is capable of removing WEDM-damaged (wire electric discharge machining) surface and produces a polished surface under dry conditions, leaving the machined surface clean. Moreover, the novel upgrade of the AFM process can be significantly more energy efficient and with finishing is simultaneously able to control the micro-topography of the product. The gearing injection mold tool case study shows that the benefits are not related merely to the process, but also to the product. It offers a significant improvement in gear performance, energy efficiency in operation, as well as in fatigue life, which is extended by more than a factor of two. As a contribution, a novel clean and energy efficient AFMmm is presented, capable of synergistically shaping and polishing the geometry of the final product on a micro level and under dry conditions.Vir: Journal of cleaner production. - ISSN 0959-6526 (Vol. 76, Aug. 2014, str. 180-189)Vrsta gradiva - članek, sestavni delLeto - 2014Jezik - angleškiCOBISS.SI-ID - 13457691
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Pušavec, Franci | 26559 |
Kenda, Jani, 1981- | 30908 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: