VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
  • Influence of pre-heating on the surface modification of powder-metallurgy processed cold-work tool steel during laser surface melting
    Šturm, Roman, 1965- ; Štefániková, Mária ; Steiner Petrovič, Darja
    In this study we determine the optimal parameters for surface modification using the laser surface melting of powder-metallurgy processed, vanadium-rich, cold-work tool steel. A combination of steel ... pre-heating, laser surface melting and a subsequent heat treatment creates a hardened and morphologically modified surface of the selected high-alloy tool steel. The pre-heating of the steel prior to the laser surface melting ensures a crack- and pore-free modified surface. Using a pre-heating temperature of 350 °C, the extremely fine microstructure, which typically evolves during the laser-melting, became slightly coarser and the volume fraction of retained austenite was reduced. In the laser-melted layer the highest values of microhardness were achieved in the specimens where a subsequent heat treatment at 550 °C was applied. The performed thermodynamic calculations were able to provide a very valuable assessment of the liquidus temperature and, especially, a prediction of the chemical composition as well as the precipitation and dissolution sequence for the carbides.
    Vir: Applied Surface Science. - ISSN 0169-4332 (Vol. 325, Jan. 2015, str. 203-210)
    Vrsta gradiva - članek, sestavni del
    Leto - 2015
    Jezik - angleški
    COBISS.SI-ID - 13845275
    DOI

vir: Applied Surface Science. - ISSN 0169-4332 (Vol. 325, Jan. 2015, str. 203-210)
loading ...
loading ...
loading ...

Vnos na polico