VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
Aluminium-alloy transfer to a CrN coating and a hot-work tool steel at room and elevated temperaturesJerina, Jure ; Kalin, MitjanDuring the processes of forming aluminium alloys, adhesion, and in particular the formation of the aluminium-alloy transfer on the bearing surface of the die, is one of the main reasons for the ... failure of tools and the poor surface quality of products. The present work was focused on the transfer initiation of an aluminium alloy (EN AW-6060) and its evolution on a coated (CrN) and an uncoated, nitrided hot-work tool steel (AISI H13) at temperatures from room temperature to 500 °C. The contact was investigated in terms of the transferred aluminium alloy surface area size on the uncoated and coated tool-steel surfaces, the topography of the wear trace and the corresponding change in the coefficient of friction. The results show the strong dependence of the tribological properties of the hot-work tool steel and the CrN coating with respect to the aluminium alloy for the temperature together with a limited dependence on the sliding distance. At 20 °C the surface roughness was found to be the main initial cause of the aluminium alloy%s transfer via mechanical interlocking. At higher temperatures (400 °C), this transfer occurred predominantly due to strong adhesion. However, at the highest tested temperature (500 °C) the CrN coating showed a notable decrease of the adhesion with a consequent reduction in the transfer of the aluminium alloy and limited transfer-film formation.Vir: Wear. - ISSN 0043-1648 (Vol. 340/341, 2015, str. 82-89)Vrsta gradiva - članek, sestavni delLeto - 2015Jezik - angleškiCOBISS.SI-ID - 14218267
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Jerina, Jure | 33243 |
Kalin, Mitjan | 14556 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: