-
Models to predict the viscosity of metal injection molding feedstock materials as function of their formulation [Elektronski vir]Gonzalez-Gutierrez, Joamin ...The viscosity of feedstock materials is directly related to its processability during injection molding; therefore, being able to predict the viscosity of feedstock materials based on the individual ... properties of their components can greatly facilitate the formulation of these materials to tailor properties to improve their processability. Many empirical and semi-empirical models are available in the literature that can be used to predict the viscosity of polymeric blends and concentrated suspensions as a function of their formulation; these models can partly be used also for metal injection molding binders and feedstock materials. Among all available models, we made a narrow selection and used only simple models that do not require knowledge of molecular weight or density and have parameters with physical background. In this paper, we investigated the applicability of several of these models for two types of feedstock materials each one with different binder composition and powder loading. For each material, an optimal model was found, but each model was different; therefore, there is not a universal model that fits both materials investigated, which puts under question the underlying physical meaning of these models.Vir: Metals [Elektronski vir]. - ISSN 2075-4701 (Vol. 6, iss. 6, May 2016, f. 1-17)Vrsta gradiva - e-članekLeto - 2016Jezik - angleškiCOBISS.SI-ID - 14692379
Avtor
Gonzalez-Gutierrez, Joamin |
Duretek, Ivica |
Kukla, Christian |
Poljšak, Andreja |
Bek, Marko |
Emri, Igor |
Holzer, Clemens
Teme
surovina |
injekcijsko brizganje kovinskega prahu |
polypropilen |
polioksimetilen |
polimerne mešanice |
vsebnost prahu |
reologija |
nerjaveče jeklo |
viskoznost |
feedstock |
metal injection molding |
models |
polypropylene |
polyoxymethylene |
polymer blends |
powder content |
rheology |
stainless steel |
viscosity
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Gonzalez-Gutierrez, Joamin | 38028 |
Duretek, Ivica | |
Kukla, Christian | |
Poljšak, Andreja | |
Bek, Marko | 33756 |
Emri, Igor | 04316 |
Holzer, Clemens |
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Obvestilo
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Mesto prevzema | Status gradiva | Rezervacija |
---|
Prosimo, počakajte trenutek.