VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
  • Using neural networks in the process of calibrating the microsimulation models in the analysis and design of roundabouts in urban areas : thesis
    Ištoka Otković, Irena
    The thesis researches the application of neural networks in computer program calibration of traffic micro-simulation models. The calibration process is designed on the basis of the VISSIM ... micro-simulation model of local urban roundabouts. From the five analyzed methods of computer program calibration, Methods I, II and V were selected for a more detailed research. The three chosen calibration methods varied the number of outgoing traffic indicators predicted by neural networks and a number of neural networks in the computer program calibration procedure. Within the calibration program, the task of neural networks was to predict the output of VISSIM simulations for selected functional traffic parameters - traveling time between the measurement points and queue parameters (maximum queue and number of stopping at the roundabout entrance). The Databases for neural network training consisted of 1379 combinations of input parameters whereas the number of output indicators of VISSIM simulations was varied. The neural networks (176 of them) were trained and compared for the calibration process according to training and generalization criteria. The best neural network for each calibration method was chosen by using the two-phase validation of neural networks. The Method Iis the calibration method based on calibration of a traffic indicator -traveling time and it enables validation related to the second observed indicator - queue parameters. Methods II and V connect the previously described calibration and validation procedures in one calibration process which calibrates input parameters according to two traffic indicators. Validation of the analyzed calibration methods was performed on three new sets of measured data - two sets at the same roundabout and one set on another location. The best results in validation of computer program calibration were achieved by the Method I which is the recommended method for computer program calibration. The modeling results of selected traffic parameters obtained by calibrated VISSIM traffic model were compared with: values obtained by measurements in the field, the existing analysis methods of operational roundabouts characteristics (Lausanne method, Kimber-Hollis, HCM) and modeling by the uncalibrated VISSIM model. The calibrated model shows good correspondence with measured values in real traffic conditions. The efficiency of the calibration process was confirmed by comparing the measured and modeled values of delays, of an independent traffic indicator that was notused in the process of calibration and validation of traffic micro-simulation models. There is also an example of using the calibrated model in the impact analysis of pedestrian flows on conflicting input and output flows of vehicles in the roundabout. Different traffic scenarios were analyzed in the real and anticipated traffic conditions.
    Vrsta gradiva - disertacija ; neleposlovje za odrasle
    Založništvo in izdelava - Maribor : [I. Ištoka Otković], 2011
    Jezik - angleški
    COBISS.SI-ID - 15017494

    Povezava(-e):

    Digitalna knjižnica Univerze v Mariboru – DKUM
    Digitalna knjižnica Slovenije - dLib.si

    Dostop z namenskih računalnikov v prostorih NUK



Knjižnica/institucija Kraj Akronim Za izposojo Druga zaloga
Narodna in univerzitetna knjižnica, Ljubljana Ljubljana NUK v čitalnico 2 izv.
ni za izposojo 2 izv.
Univerzitetna knjižnica Maribor Maribor UKM v čitalnico 2 izv.
Knjižnica tehniških fakultet, Maribor Maribor KTFMB v čitalnico 1 izv.
loading ...
loading ...
loading ...

Vnos na polico