VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
  • Low-cycle fatigue performance of stress-aged EN AW-7075 alloy [Elektronski vir]
    Sajadifar, Seyed Vahid ...
    The effect of a novel heat treatment, i.e., aging under superimposed external stress, on the fatigue performance and microstructural evolution of EN AW-7075 alloy is presented. Stress aging, a ... combination of heat treatment and superimposed external stress, can enhance the mechanical properties of EN AW-7075 alloy under monotonic loading due to the acceleration of precipitation kinetics. Scanning electron microscopy (SEM) and scanning transmission electron microscopy (STEM) revealed that a longer aging time and the presence of superimposed stress both promote the formation and growth of precipitates, i.e., the precipitation of a higher fraction of strengthening η´ precipitates. This has been confirmed by differential scanning calorimetry (DSC) heating experiments of stressless and stress aged states. In case of stress aging this is combined with a reduction of dimensions of precipitate-free zones near grain boundaries. Cyclic deformation responses (CDRs) and half-life hysteresis loops were evaluated focusing on the low-cycle fatigue (LCF) performance of the different conditions. A Non-Masing behavior and the noticeable cyclic hardening seen in case of the specimens aged for a short time of 2 h indicate the occurrence of dynamic strain aging (DSA) during cyclic deformation. Stress aging allows the enhancement of the monotonic mechanical properties of EN AW-7075 without degrading the alloy performance in the LCF regime. Results obtained herein will be of importance for the development of stress-aged aluminum components with superior properties.
    Vir: Advanced engineering materials [Elektronski vir]. - ISSN 1527-2648 (Vol. 25, iss. 15, [article no.] 2300090, Aug. 2023, str. 1-13)
    Vrsta gradiva - e-članek ; neleposlovje za odrasle
    Leto - 2023
    Jezik - angleški
    COBISS.SI-ID - 151112707