VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
The effects of milling strategies on forces, material removal rate, tool deflection, and surface errors for the rough machining of complex surfacesBagci, Eyup ; Yüncüoğlu, ErcümentThe high-performance machining of curved surfaces is a highly critical process that is crucial in modern engineering applications. Different methodologies and CAM tools have been developed by ... manufacturers to improve the efficiency of the sculptured surface milling. The determination of appropriate tool path strategies and milling conditions is crucial in ensuring a high productivity rate, meeting the better surface texture values, and lower cutting forces, tool deflection, and surface errors. The objective of this research is to analyse the effect of tool path strategies on dynamic tool deflection, cutting forces, machining time, effective cutter diameter (ECD), cutter/workpiece engagement (CWE) area, instantaneous material removal rate (IMRR), and machining errors in rough machining of a sculptured surface. The B-rep solid modeling-based simulation and the optimization system were developed and integrated with the commercial CAD/CAM software for 3-axis ball-end milling. The experimental results clearly show the influence of the cutter path strategies on machining times and their importance for reducing time needed and, consequently, costs. It was observed that the profiles of deflection, IMRR values, cutting forces, machining errors and ECD values match very well for cutting strategies. Machining strategies employed include various degrees of zig-zag, profiling, and spiral. The conclusion is that the 90° zig-zag strategy provokes the lowest cutting forces, tool deflection, and surface error values. The in-house NC simulation system performed well in determining values and the location of milling form errors on the surface.Vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 63, no. 11, Nov. 2017, str. 643-656, SI 95)Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasleLeto - 2017Jezik - angleškiCOBISS.SI-ID - 15745307
vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 63, no. 11, Nov. 2017, str. 643-656, SI 95)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Bagci, Eyup | |
Yüncüoğlu, Ercüment |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: