VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
Effect of vibrator parameters and physical characteristics of parts on conveying velocityVellingiri, Vishwa Priya ; Sadasivam, UdhayakumarAutomation is generally employed in the area of orienting, lifting, and moving parts for production in industries including automotive, electronic, food, and packaging. With the help of automation, ... it is possible to reduce the manufacturing time and labour required. The most adaptable tools for feeding small, designed pieces during part assembly are vibratory feeders. Industries have been effectively using vibratory feeders for more than 30 years, indicating that such technology is advanced. Although research in this area has not been lacking, a fundamental understanding of the interactions between a part’s physical characteristics and the various vibratory feeder operating parameters in relation to optimal performance, defined as conveying a part with maximum stability and maximum velocity, remains lacking in linear feeders. While several papers discuss the effect of vibratory parameters (excitation frequency and amplitude of vibration) and the coefficient of friction, the effect of characteristics of part (l/w ratio and mass) is neglected. In this work, the effect of these factors on the conveying velocity of prismatic parts made of aluminium and brass on a horizontal track without inclination was determined, and an attempt was made to develop a predictive model based on the above factors. Using Taguchi’s design of experiments (DOE), an L16 orthogonal array was designed. A response table for the signal-to-noise ratio has yielded optimal values for each parameter taken into consideration. ANOVA predicted frequency as the most influential parameter, followed by the coefficient of friction. The regression analysis yields an R2 value of 99.3 % for aluminium and 98.7 % for brass. The results of the regression model and random experiments show a high correlation of 91.66 %. This model is required to set the desired conveying velocity of parts so that continuous flow can be maintained in automated assembly or packaging industries.Vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 69, no. 7/8, Jul./Aug. 2023, str. 352-363)Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasleLeto - 2023Jezik - angleškiCOBISS.SI-ID - 159384835
![loading ... loading ...](themes/default/img/ajax-loading.gif)
vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 69, no. 7/8, Jul./Aug. 2023, str. 352-363)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Vellingiri, Vishwa Priya | ![]() |
Sadasivam, Udhayakumar | ![]() |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: