VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
Celotno besedilo
  • Laser deposition of Metco 15E, Colmony 88 and VIM CRU 20 powders on cast iron and low carbon steel
    Lestan, Zoran ...
    In the tooling industry, there is often the need to repair damaged or worn out components, or to apply coatings on functional surfaces of tools. When depositing a material which properties are very ... different from the properties of the substrate material, difficulties, such as cracks, can occur. In this paper, we investigate the deposition of three different powders (Metco 15 E, Colmony 88 and VIM CRU 20) on cast irons and low carbon steel with the laser engineered net shaping (LENST) technology. Coatings with a maximum of four layers were deposited with different process parameters. Although most bonds itself were of good quality, some coatings had numerous cracks. Preheating of the cast iron samples with the laser beam was used to reduce the number of cracks. In the preheating process, the surface of samples was partially melted in order to dissolve graphite nodules which were often the starting point of cracks.
    Vir: International journal of advanced manufacturing technology. - ISSN 0268-3768 (Vol. 66, iss. 9/12, June 2013, str. 2023-2028)
    Vrsta gradiva - članek, sestavni del
    Leto - 2013
    Jezik - angleški
    COBISS.SI-ID - 16247830
    DOI