VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
  • Influence of geometry and safety factor on fatigue damage predictions of a cantilever beam
    Pečnik, Matija, 1991- ; Nagode, Marko ; Šeruga, Domen
    The influence of two parameters on fatigue damage predictions of a variably loaded cantilever beam has been examined. The first parameter is the geometry of the cantilever beam and the weld ... connecting it to a rear panel. Variables of the geometry examined here include the cantilever length, the weld width on the critical cross-section and the angle of the critical cross-section. The second parameter is the safety factor, as set out by the Eurocode 3 standard. An analytical approach has been used to calculate the stresses at the critical cross-section and standard rainflow counting has been used for the extraction of the load cycles from the load history. The results here suggest that a change in the width and angle of the critical cross-section has a non-linear impact on the fatigue damage. The results also show that the angle of the critical cross-section has the biggest influence on the fatigue damage and can cause the weld to withstand fatigue better. The second parameter, the safety factor, is shown to have a significant effect on the fatigue damage calculation, whereby a slight increase in the endurance safety factor can cause the calculated fatigue damage to increase considerably.
    Vir: Structural engineering and mechanics. - ISSN 1225-4568 (Vol. 70, no. 1, Apr. 2019, str. 33-41)
    Vrsta gradiva - članek, sestavni del
    Leto - 2019
    Jezik - angleški
    COBISS.SI-ID - 16558875

    Povezava(-e):

    http://www.techno-press.org/download.php?journal=sem&volume=70&num=1&ordernum=3

    Dostop do polnega članka z geslom


    Repozitorij Univerze v Ljubljani – RUL
    DOI

Vnos na polico