-
Dynamic measurements using FDM 3D-printed embedded strain sensors [Elektronski vir]Maurizi, Marco, strojnik ...3D-printing technology is opening up new possibilities for the co-printing of sensory elements. While quasi-static research has shown promise, the dynamic performance has yet to be researched. This ... study researched smart 3D structures with embedded and printed sensory elements. The embedded strain sensor was based on the conductive PLA (Polylactic Acid) material. The research was focused on dynamic measurements of the strain and considered the theoretical background of the piezoresistivity of conductive PLA materials, the temperature effects, the nonlinearities, the dynamic range, the electromagnetic sensitivity and the frequency range. A quasi-static calibration used in the dynamic measurements was proposed. It was shown that the temperature effects were negligible, the sensory element was linear as long as the structure had a linear response, the dynamic range started at % 30 %% and broadband performance was in the range of few kHz (depending on the size of the printed sensor). The promising results support future applications of smart 3D-printed systems with embedded sensory elements being used for dynamic measurements in areas where currently piezo-crystal-based sensors are used.Vir: Sensors [Elektronski vir]. - ISSN 1424-8220 (Vol. 19, iss. 12, 2019, f. 1-15)Vrsta gradiva - e-članekLeto - 2019Jezik - angleškiCOBISS.SI-ID - 16662555
Avtor
Maurizi, Marco, strojnik |
Slavič, Janko, 1978- |
Cianetti, Filippo |
Jerman, Marko, strojnik |
Valentinčič, Joško |
Lebar, Andrej, strojnik |
Boltežar, Miha
Teme
3D-tiskanje |
zaznavala deformacij |
vgrajeni senzorji |
dinamične meritve |
pametne strukture |
3D-printing |
strain sensors |
embedded sensors |
dynamic measurements |
fused deposition modeling |
smart structures
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Maurizi, Marco, strojnik | |
Slavič, Janko, 1978- | 23010 |
Cianetti, Filippo | |
Jerman, Marko, strojnik | 33239 |
Valentinčič, Joško | 18553 |
Lebar, Andrej, strojnik | 12260 |
Boltežar, Miha | 02034 |
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Obvestilo
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Mesto prevzema | Status gradiva | Rezervacija |
---|
Prosimo, počakajte trenutek.