VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
Mechanisms of defect formation in Ti-6Al-4V product during re-melting of layers in selective laser melting [Elektronski vir]Pal, Snehashis ...Knowledge of defect formation mechanisms in the manufacturing process helps improve product quality. In this study, defect formation due to re-melting of each layer in selective laser melting of ... Ti-6Al-4V demonstrated the physical behavior in the manufacture of metallic parts. The re-melting strategy was based on scanning with low energy density (ED) and increased ED with various combinations of laser processing parameters. The increased EDs and their parameters, namely laser power, scanning speed, and hatch distance, were selected based on the previous research experience by the authors. The concept of selecting a low ED followed by a high ED was to reduce the spattering of the powder material during the process. The low ED caused partial sintering of the powder, while the high ED caused the melting of the material, resulting in different metallurgical properties of the manufactured parts. Densities, pore properties, porosity in the initial layers, surface morphologies, and microstructures in the defective areas of the samples were studied to determine the effects of re-melting. Advantages and disadvantages were found with respect to the range of applications of the productsVir: Journal of manufacturing processes [Elektronski vir]. - ISSN 2212-4616 (Vol. 105, 3 Nov. 2023, str. 260-275)Vrsta gradiva - e-članek ; neleposlovje za odrasleLeto - 2023Jezik - angleškiCOBISS.SI-ID - 166689539
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Pal, Snehashis | 52556 |
Finšgar, Matjaž | 28477 |
Hudak, Radovan | |
Rajtukova, Viktoria | |
Brajlih, Tomaž | 26248 |
Gubeljak, Nenad | 10470 |
Drstvenšek, Igor | 11943 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: