VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
Grounding characteristics of a non-pneumatic mechanical elastic tire in a rolling state with a camber angleDu, Xianbin ...A non-pneumatic mechanical elastic tire (ME wheel) was introduced, and the grounding characteristics of the ME wheel under a rolling condition with a camber angle were investigated with the ... combination of finite element simulation and experimental research. According to the ME wheel structure and material characteristics, a numerical simulation model of the ME wheel was established using the finite element (FE) method. The stiffness tests were carried out to verify the accuracy of the simulation model of the ME wheel. To highlight the advantages of the ME wheel, an inflatable tire was selected as the reference tire, and the grounding characteristics of these two tires with different camber angles were compared and analysed in free rolling, braking, and driving conditions. Different slip ratio values for the ME wheel and inflatable tire were applied in driving conditions to analyse the influence of the slip ratio on the grounding characteristics. The obtained results indicated that both the ME wheel and inflatable tire will gradually suffer partial wear of the tread surface as the camber angle increases, but the pressure concentration of the inflatable tire is more serious. The research can provide a basis for structural optimization and comprehensive mechanical performance analysis of the ME wheel.Vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 65, no. 5, May 2019, str. 287-296)Vrsta gradiva - članek, sestavni delLeto - 2019Jezik - angleškiCOBISS.SI-ID - 16670235
Avtor
Du, Xianbin |
Zhao, Youqun |
Wang, Qiang, strojnik |
Fu, Hongxun |
Lin, Fen
Teme
wheels |
grounding characteristics |
finite element analysis |
contact pressure |
camber angle |
kolesa |
lastnosti stika s podlago |
metoda končnih elementov |
kontaktni pritisk |
kot previsa |
obraba tekalne površine
vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 65, no. 5, May 2019, str. 287-296)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Du, Xianbin | |
Zhao, Youqun | |
Wang, Qiang, strojnik | |
Fu, Hongxun | |
Lin, Fen |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: