VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
Research on an analytical method for the forming force of external spline cold roll-beatingMa, Qun ; Zhang, XiangweiTo determine the force and energy parameters of cold roll-beating of external splines, the characteristics of the deformation zone in cold roll-beating are analysed. The geometric dimensions and ... position of the deformation zone change with the movement of the roller, the contact arc, and the reduction are very small, and there is an incomplete deformation zone in the initial stage of cold roll-beating. A discrete analytical method for calculating the unit pressure and deformation force is proposed, and the cold roll-beating process is discretized into an infinite number of cold-rolling processes with complex sections. The discrete analytical model of unit pressure and deformation force is established, and the unit pressure value and its distribution characteristics are determined. To verify the discrete analytical model, a finite element model of cold roll-beating is established, and the forming force is calculated. A horizontal milling machine is modified to carry out the cold roll-beating experiment, and the forming force is measured. The predicted results of the discrete analytical model are compared with the simulation and experiment results. The results show that the maximum error of radial force compared with the simulation and experiment results is about 7 % and 4 % respectively, and the variation curve of radial force is basically consistent, but the time of a cold roll-beating process is slightly shorter. The discrete analytical model correctly predicts the magnitude and change process of cold roll-beating forming force.Vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 69, no. 9/10, Sept./Oct. 2023, str. 409-421)Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasleLeto - 2023Jezik - angleškiCOBISS.SI-ID - 168723715
vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 69, no. 9/10, Sept./Oct. 2023, str. 409-421)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Ma, Qun | |
Zhang, Xiangwei |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: