VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
Uneven load contact dynamic modelling and transmission error analysis of a 2K-V reducer with eccentricity excitationWang, Guangjian ; Su, Li ; Zou, ShuaidongIn this paper, the formula of non-load transmission error (TE) and time-varying backlash is derived through the incremental meshing line method based on the eccentricity error model of 2K-V gear pair ... with small tooth difference. Considering the influence of uneven load contact between two gear pairs with small tooth difference, the static transmission error (STE) of a 2K-V gear pair with small tooth difference is deduced. This work helps to predict the TE caused by eccentricity error and provide inference to compensate backlash. Also, we establish the nonlinear dynamic model of 2K-V small tooth difference under eccentricity excitation, in which non-linear factors such as non-uniform load, time-varying backlash, transmission error and contact stiffness are considered, and validated the theoretical model by comparing the dynamic transmission error in simulation and in theory. Furthermore, the transmission error of the 2K-V gear reducer was tested, and the test results further verified the uneven load contact phenomenon of the gear pair with small tooth difference in the meshing process. At the same time, the experimental transmission error frequency spectrum is consistent with the theoretical results, indicating that the transmission accuracy of the 2K-V reducer is mainly caused by the eccentricity error of the gear pair with small tooth difference. Finally, we optimized the initial eccentricity phase and predicted the minimum transmission error, providing theoretical guidance for the assembly of 2K-V small tooth difference gear pairs.Vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 66, no. 2, Feb. 2020, str. 91-104)Vrsta gradiva - članek, sestavni delLeto - 2020Jezik - angleškiCOBISS.SI-ID - 17045531

vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 66, no. 2, Feb. 2020, str. 91-104)



Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Faktor vpliva
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Wang, Guangjian | ![]() |
Su, Li | ![]() |
Zou, Shuaidong | ![]() |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: