-
Effects of the opening speed of the valve in a diaphragmless shock tube for metrological purposesHernández Castro, Francisco Javier ; Kutin, Jože ; Svete, Andrej, 1983-To develop a measurement system for calibrating high-frequency dynamic pressure that is capable of acting as a primary dynamic pressure calibration standard, a new concept of the shock tube, called ... the diaphragmless shock tube, has recently been developed. In most such shock tubes, the diaphragm is replaced with a commercially available, ISTA KB fast-opening valve (FOV). In this article, a numerical model was built in OpenFOAM to investigate the effects of the opening mechanism of ISTA KB-40-100 FOV on the formation of the shock wave in a shock tube with an internal radius of 20 mm. Numerical simulations were performed for the driver-driven pressure ratio of 40 and the valve-opening speeds of 5, 10, and 20 m/s, which were compared with the case of instantaneous valve opening, and the results predicted by the ideal shock tube theory. The observed variables were the mass flow through the valve, as well as the pressure, the temperature, and the shock wave velocity in the formation region behind the valve. The results show that when the shock wave undergoes an initial acceleration, the shock front accelerates more at higher opening speeds of the valve. The results also show that the valve-opening mechanism generates a series of reflection waves that propagate into the driven section, giving the shock wave velocity an oscillatory character, which can affect the calibration and measurement capability of the shock tube as a primary high-frequency, time-varying, pressure calibration standard.Vir: IEEE sensors journal. - ISSN 1530-437X (Vol. 24, no. 1, Jan. 2024, str. 158-168)Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasleLeto - 2024Jezik - angleškiCOBISS.SI-ID - 179395587
Avtor
Hernández Castro, Francisco Javier |
Kutin, Jože |
Svete, Andrej, 1983-
Teme
diaphragmless shock tubes |
numerical simulations |
OpenFOAM |
primary calibration method |
shock wave formation |
time-varying pressure |
brezmembranske udarne cevi |
numerične simulacije |
OpenFOAM |
primarna kalibracijska metoda |
formiranje udarnega vala |
časovno spreminjajoči tlak
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Hernández Castro, Francisco Javier | 55552 |
Kutin, Jože | 20047 |
Svete, Andrej, 1983- | 29619 |
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Obvestilo
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Mesto prevzema | Status gradiva | Rezervacija |
---|
Prosimo, počakajte trenutek.