VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
  • Computational assessment of the allowable static contact loading of a roller-slewing bearing's case-hardened raceway
    Göncz, Péter ; Ulbin, Miran ; Glodež, Srečko
    A computational model for the assessment of the static load capacity of roller-slewing bearings with a case-hardened raceway is presented in this paper. The proposed 3D numerical model considers ... different influential parameters (arbitrary roller geometry, actual mechanical properties of raceway's material, tilted contact between the roller and raceway segment, etc.) on the allowable contact loading between rollers and their raceway. Within this paper, three representative types of roller geometries and their effect on the static load capacity are investigated: a cylindrical roller (ZR), a logarithmical roller (LN) and a partially crowned roller (ZB). For each type of roller, two different criteria are then used to determine the limit contact loading: (i) permanent indentation criterion and (ii) subsurface damage criterion. The results of a comprehensive computational analysis have shown that there are significant differences between each roller type with regards to limit contact load. The other important influencing parameters are the case depth of the raceway and the tilt angle, which mainly depends on the bearing clearance, and the contact loading. The proposed model and results presented here may allow manufacturers to take into account some particularities of large slewing bearings to improve their static load capacity.
    Vir: International journal of mechanical sciences. - ISSN 0020-7403 (Vol. 94/95, May 2015, str. 174-184)
    Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasle
    Leto - 2015
    Jezik - angleški
    COBISS.SI-ID - 18574102

Vnos na polico