VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
  • COST-FP1105 : properties of PLA films reinforced with unmodified and acetylated freeze dried nanofibrillated cellulose
    Žepič Bogataj, Vesna ...
    Freeze dried nanofibrils were acetylated in a heterogeneous system with acetic anhydride, pyridine, and dimethylformamide and the obtained acetylated cellulose nanofibrils (CNFac) were combined with ... poly(lactic acid) (PLA) to a composite. CNFac with its partially hydrophobic surface showed a good compatibility with PLA resulting in composite films with improved properties. Tensile strength (TS), modulus of elasticity (MOE), and elongation at break (EB) of PLA/CNF increased significantly when 2%-5% of CNFac was added to the PLA matrix, while the addition of 10% and higher amounts CNFac decreased the EB at a higher TS and MOE. Mechanical parameters did not improve in the case of unmodified CNF addition. The addition of CNFac maintained transparency and had absorbance values between those of pure PLA film and PLA film with 2% CNF, while films formed with the addition of 5 and 10% of CNF were less transparent. The addition of CNF did not essentially affect the thermal properties of nanocomposite films. The addition of 2%-10% of CNFac increased the enthalpy and maximal temperature of cold crystallization as opposed to higher loading of CNFac. The results of differential scanning calorimetry (DSC) coincide with those of the mechanical properties. Tailoring properties of PLA/CNF are only reproducible in case of homogenously distributed CNF within the PLA matrix and by an improved interphase adhesion between PLA and CNF
    Vir: Holzforschung. - ISSN 0018-3830 (Vol. 70, no. 12, 2016, str. 1125-1134)
    Vrsta gradiva - članek, sestavni del
    Leto - 2016
    Jezik - angleški
    COBISS.SI-ID - 2670985

vir: Holzforschung. - ISSN 0018-3830 (Vol. 70, no. 12, 2016, str. 1125-1134)
loading ...
loading ...
loading ...