VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
  • Influence of the processing temperature on the tribological and mechanical properties of poly-ether-ether-ketone (PEEK) polymer
    Zalaznik, Maša ; Kalin, Mitjan ; Novak, Saša, 1957-
    The main aim of this research was to investigate the influence of different processing temperatures on the properties of pure poly-ether-ether-ketone (PEEK). In order to do this, we used a variation ... of compression moulding, which enabled us to use different processing temperatures, including temperatures below the melting point of PEEK. The PEEK samples were produced at temperatures below, around and above the melting point of PEEK and were compared to a commercially available PEEK material produced with a conventional procedure. The results of the dry-sliding tribological tests, the hardness measurements and the XRD analyses show that the processing temperature greatly influences the hardness and the crystallinity, which in turn affects the tribological behaviour.
    Vir: Tribology international. - ISSN 0301-679X (Vol. 94, Feb. 2016, str. 92-97)
    Vrsta gradiva - članek, sestavni del
    Leto - 2016
    Jezik - angleški
    COBISS.SI-ID - 28829735
    DOI

Vnos na polico