VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
Use of equations for wear volume determination in fretting experimentsKalin, Mitjan ; Vižintin, JožeIn every tribological application, the extent of damage or surface deterioration is of interest. There are several methods of evaluating the wear volume/loss, which can be roughly classified into ... weighing, topographical analysis, and 2D analysis by means of empirical equations. In tribological research where many specimens need to be analysed, a simple and fast procedure is desirable for wear volume/loss determination. Methods with time-consuming specimen preparation or measuring procedures are not appropriate in these cases. Sometimes, this is accompanied by very low wear volumes/losses, as is the case in most fretting experiments, which also limits the adequacy of some methods. The use of empirical equations is by far the easiest, fastest and cheapest way to obtain the wear volume in a tribological test, but it has one major disadvantage, i.e. its accuracy may be poor. In this paper we compare calculated values from three different equations with stylus-tip profilometry determination of wear volume, based on the results of a comprehensive study of fretting wear of steel and ceramics. The effect of different material combinations, amplitude of oscillation, size of the wear scar and lubrication on the accuracy of these equations is presented. Justification for the use of 2D analysis in terms of empirical equations in research with many specimens used and low-extent wear is discussed.Vir: Wear. - ISSN 0043-1648 (Vol. 237, issue 1, 2000, str. 39-48)Vrsta gradiva - članek, sestavni delLeto - 2000Jezik - angleškiCOBISS.SI-ID - 3593755
Avtor
Kalin, Mitjan |
Vižintin, Jože
Teme
tribologija |
volumen obrabni |
jekla |
keramika |
freting |
wear volume |
steel |
ceramics |
fretting
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Kalin, Mitjan | 14556 |
Vižintin, Jože | 00812 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: