VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
Pre-oxidation of selective-laser-melted titanium dental alloy : effects on surface characteristics and porcelain bondingAntanasova, Maja ...The heat treatment of dental alloys prior to porcelain application/veneering has been proposed as a way to ensure sufficient oxide scale and to promote the porcelain's adherence in ... porcelain-fused-to-metal (PFM) fixed dental prostheses. The present study investigates the relationship between the bond strength of the dental porcelain to selective-laser-melted (SLM) titanium and the temperature of the titanium's pre-oxidation. The SLM Ti-6Al-4V substrates were airborne-particle abraded and either left to passivate in air at room temperature (control) or pre-oxidized in a furnace under vacuum conditions (10kPa) at temperatures of 300, 600, 750, or 800°C. The surface characteristics were determined using contact profilometry to measure the profile roughness (Ra ), atomic force microscopy for the surface roughness (S a ) and Auger electron spectroscopy for the thickness of the oxide scale. Dental porcelain was applied to the metal substrates and the titanium-ceramic bond was assessed according to the ISO standard 9693-1:2012. The metal-ceramic interfaces were analyzed with scanning electron microscopy and energy-dispersive spectroscopy. The R a and S a values showed a strong positive correlation with the pre-oxidation temperature. The oxide scales covering the titanium surfaces thickened markedly at temperatures of 750°C and above. However, the bond strength was negatively correlated with the pre-oxidation temperature. Room-temperature passivation in air following the airborne-particle abrasion of the SLM titanium resulted in a titanium-ceramic bond that is well above the ISO 9693-1:2012 recommended minimum value for metal-ceramic systems. Thus, no pre-oxidation of SLM titanium frameworks is necessary prior to the application/firing of porcelain.Vir: Journal of adhesion science and technology. - ISSN 0169-4243 (Vol. 35, iss. 19, 2021, str. 2094-2109)Vrsta gradiva - članek, sestavni delLeto - 2021Jezik - angleškiCOBISS.SI-ID - 50192131
vir: Journal of adhesion science and technology. - ISSN 0169-4243 (Vol. 35, iss. 19, 2021, str. 2094-2109)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Antanasova, Maja | 52861 |
Kocjan, Andraž, 1978- | 26027 |
Abram, Anže, 1986- | 35460 |
Kovač, Janez, 1965- | 15703 |
Jevnikar, Peter, 1965- | 13229 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: