VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
  • Ultimate resistance of longitudinally stiffened curved plates subjected to pure compression
    Piculin, Sara, gradbenica, 1988- ; Može, Primož
    Design guidelines are proposed for the calculation of the ultimate resistance of longitudinally stiffened, transversally curved plates subjected to uniform compression. They represent internal plated ... members of box-girders. The proposed method is in accordance with the Eurocode formalism and follows the effective width concept from EN 1993-1-5. The latter strongly underestimates the resistance of stiffened, curved plates. Therefore, the new method extends the scope of the current European standards from flat to curved plates. A general form of the buckling coefficient is derived for orthotropic shell buckling, which is consistent with the solution for orthotropic buckling of plates according to Annex A, EN 1993-1-5. The method presented combines the new equation with the existing design proposals for unstiffened curved panels from the literature and the current design rules for flat plated structures according to EN 1993-1-5. The method is compared with numerical results on simply supported, cylindrically curved panels stiffened with trapezoidal longitudinal stiffeners, where the longitudinal edges are unconstrained and loaded edges are constrained, and a good correlation is achieved.
    Vir: Journal of constructional steel research. - ISSN 0143-974X ([No.] 106616, Letn. 181, jun. 2021, [19] str.)
    Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasle
    Leto - 2021
    Jezik - angleški
    COBISS.SI-ID - 55159299

    Povezava(-e):

    Repozitorij Univerze v Ljubljani – RUL
    DOI

vir: Journal of constructional steel research. - ISSN 0143-974X ([No.] 106616, Letn. 181, jun. 2021, [19] str.)
loading ...
loading ...
loading ...

Vnos na polico