VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
Effects of slide-to-roll ratio and temperature on the tribological behaviour in polymer-steel contacts and a comparison with the performance of real-scale gearsMatkovič, Sebastjan ; Kalin, MitjanGearboxes that employ polymer gears are being used in an ever-increasing number of different applications. However, polymer-gear design suffers from a lack of understanding of their tribological ... behaviour under controlled - but at the same time realistic - conditions. One of the factors that is often overlooked in model tribological tests is the effect of the slide-to-roll ratio (SRR), which is different in gear meshing and conventionally used model tribological experiments with pure sliding. In this study, we analyse the wear mechanisms and wear coefficients, as well as the friction, in very common gear pairs of non-lubricated POM/steel contacts, but at different SRRs (25 to 150%) and at two controlled temperatures (50 and 80 °C). The load was also varied (8 and 45 N). The results show that tests at 50 °C in SRR-variable model tribotests can predict the SRR-dependent wear mechanisms along the meshing path (positions A-E) in real gears, while the 80 °C tests are too severe, leading to thermal overload. An about 10-times-larger wear coefficient, compared to the gear tests, was measured during our SRR-variable tests, which is a better estimation compared to the common pin-on-disc test with 2-4 orders-of-magnitude deviation. Furthermore, based on an accurate simulation of the friction behaviour in model tribotests, compared to gear tests, an empirical model based on tribological tests with a variable SRR was developed that predicts the coefficient of friction along the meshing contact line in real-scale gears with a 3% deviation. This study shows that the SRR- and temperature-controlled model tribological tests are relevant for understanding the real-scale polymer gears' tribological behaviour and mechanisms and furthermore they generate predictive, empirical results.Vir: Wear. - ISSN 0043-1648 (Vol. 477, July 2021, str. 1-13)Vrsta gradiva - članek, sestavni delLeto - 2021Jezik - angleškiCOBISS.SI-ID - 55854339
Avtor
Matkovič, Sebastjan |
Kalin, Mitjan
Teme
polymers |
POM |
steel |
gears |
slide-to-roll ratio (SRR) |
wear |
friction |
polimeri |
jekla |
zobniki |
razmerje med drsenjem in kotaljenjem |
obraba |
trenje
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Matkovič, Sebastjan | 53511 |
Kalin, Mitjan | 14556 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: