VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
Surface compositional changes induced by ion beam sputtering of Fe-Si-Al alloyŠetina, Barbara ; Jenko, Monika, metalurginjaIon beam sputtering is a versatile tool for inducing changes of the surface structure and morphology. Depending on the substrate and ion beam conditions, various morphlogical features can be observed ... on the surfaces of metals; such as etch pits, smooth surfaces, periodic ripple-like or faceted structures, or rough affine surfaces. Experimental work on characterization of the so-induced surfaces, but polycrystalline substrates have the advantage of including many crystal orientations in a single experimental run. It is also possible to characterize the orientation of each individual grain by Electron Backscatter Diffraction (EBSD) technique, thus gaining a complete set of orientations and the patterns formed. The surface also undergoes certain changes in the surface elemental composition, which is mainly due to two effects: preferential sputtering in a multi-component system and ion-beam induced segregation. In the scope of performed experimental work, we tried to correlate the ion-beam induced segregation with crystal orientation and the starting composition. To this effect, we used two sets of experimental Fe-2%Si1%Al alloys, which were similar in compositon but for the amount of surface active elements (P, S, Se) which are usually associated with segregation and surface reconstruction at higher temperatures. The specimens were etched by Ar+ ions and the surface compositional changes were investigated by means of Auger electron spectroscopy and X-ray photoelectron spectros[!]opy. The results show ion-beam induced segregation of S, which forms a chemical bond with Fe in the surface layers. Some preferential sputtering was also observed.Vir: Programme and book of abstracts (Str. 46)Vrsta gradiva - prispevek na konferenciLeto - 2010Jezik - angleškiCOBISS.SI-ID - 811946
Avtor
Šetina, Barbara |
Jenko, Monika, metalurginja
Teme
Fe-Si-Al alloy |
surface structure |
segregation |
EBSD
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Šetina, Barbara | 25498 |
Jenko, Monika, metalurginja | 05675 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: