VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
Setting a numerical simulation of filling and solidification of heavy steel ingots based on real casting conditions = Postavitev numerične simulacije polnjenja in strjevanja velikih jeklenih ingotov na podlagi realnih razmer pri ulivanjuTkadlečková, Markéta ...The paper is devoted to new experiences with the setting of a numerical simulation of filling and solidification of a 90-ton steel ingot in the ProCAST simulation programme. The aim of the numerical ... modelling realized under the conditions of the Department of Metallurgy and Regional Materials Science and Technology Centre (RMSTC) at VSB-TU Ostrava is the verification and optimization of the production technology for the heavy-steel ingots produced in VÍTKOVICE HEAVY MACHINERY a.s. The input parameters of the computation were determined with the real conditions of casting a 90-ton steel ingot. The ingot geometry was created in the CAD system SolidWorks. Before the computational grid generation of finite elements in the Visual-Meshmodule, the geometry was subjected to an analysis of the topology. The material properties of the individual components of the ingot-casting system were defined with the Computherm calculating module selecting the materials from its own database of ProCast. In addition, the thermodynamic properties were determined by using the datasheets of the refractory materials of the manufacturer, and finally checked with the equations generally used to determine liquidus and solidus temperatures, density and enthalpy, etc. The boundary conditions and the heat transfer were also defined. In parallel with the numerical simulation, the operational experimental casting of a 90-ton ingot was carried out. To obtain more complete information about the temperature fields of the ingot-casting system and of the data about the values of the heat flow, the process of filling and solidification was monitored by using thermal imaging cameras. The conclusion summarizes the main knowledge obtained on the basis of the primary results of the computation and gives a guideline for further research.Vir: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 46, št. 4, jul.-avg. 2012, str. 399-402)Vrsta gradiva - članek, sestavni delLeto - 2012Jezik - angleškiCOBISS.SI-ID - 938154
Avtor
Tkadlečková, Markéta |
Machovcak, Pavel |
Gryc, Karel |
Klus, Petr |
Michalek, Karel |
Socha, Ladislav |
Kovac, Marek
Teme
numerical simulation |
ingot |
heat flow |
thermal measuring |
ulivanje |
strjevanje |
numerična simulacija |
ingoti |
toplotni tok |
termografske meritve
![loading ... loading ...](themes/default/img/ajax-loading.gif)
vir: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 46, št. 4, jul.-avg. 2012, str. 399-402)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Tkadlečková, Markéta | ![]() |
Machovcak, Pavel | ![]() |
Gryc, Karel | ![]() |
Klus, Petr | ![]() |
Michalek, Karel | ![]() |
Socha, Ladislav | ![]() |
Kovac, Marek | ![]() |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: