VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
The tribological performance of DLC coatings under oil-lubricated fretting conditionsKalin, Mitjan ; Vižintin, JožeWhether or not the process of fretting occurs is to a large extent dependent on the coefficient of friction, because the coefficient of friction directly affects the amount of shear stress. As a ... result, the key factor when it comes to reducing the amount of fretting damage is to reduce the coefficient of friction. Various surface coatings, and especially hard, diamond-like carbon (DLC) coatings, are known to be able to produce surfaces with a low level of friction. Despite some such attempts in the past, which did not result in major improvements, the developments and improvements in DLC coatings in recent years suggest the need for a re-evaluation of these coatings for fretting applications. Another way to reduce the amount of friction in mechanical components is to apply lubricants, and recent studies on the lubrication of DLC coatings suggest that this combination could be very successful in preventing failures under boundary-lubrication conditions. Therefore, in this work we present the results of friction and wear measurements from three types of fretting contacts: steel/steel, steel/DLC andDLC/DLC. Boundary oil-lubrication conditions were investigated and a wide range of displacement amplitudes, i.e., from 25 to 500 m, were selected to assess the fretting and sliding behaviours. The results show a significant difference between the fretting and sliding regimes. In the fretting regime, the DLC-containing contacts, and especially the self-mated DLC/DLC contacts, performed much better than the steel/steel contacts, and significantly reducedboth the wear (a 3-10 times reduction with steel/DLC and DLC/DLC) and the friction (a more-than-two-times reduction with DLC/DLC). In the sliding regime, the lubrication effects governed the tribological performance, making the results for all three material combinations very similar.Vir: Tribology international. - ISSN 0301-679X (Letn. 39, št. 10, 2006, str. 1060-1067)Vrsta gradiva - članek, sestavni delLeto - 2006Jezik - angleškiCOBISS.SI-ID - 9486619
Avtor
Kalin, Mitjan |
Vižintin, Jože
Teme
tribologija |
DLC prevleke |
torna obraba |
mazanje |
trenje |
obraba |
stiki površin |
drsenje materialov |
stiki jeklo-jeklo |
stiki DLC-DLC |
DLC coatings |
fretting |
sliding |
iol lubrication |
wear
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Kalin, Mitjan | 14556 |
Vižintin, Jože | 00812 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: