Knjižnica tehniških fakultet, Maribor (KTFMB)
  • Microstructure of a continuously cast Ni-based dental alloy [Elektronski vir] = Mikrostruktura kontinuirno ulite nikljeve dentalne zlitine Nikljeve
    Zupanič, Franc ...
    Ni-based alloys produced by continuous casting possess several advantages when compared to the conventionally cast ones. Their microstructure is much finer, providing better mechanical properties, ... and the continuous casting process is more cost effective. The main emphasis was given to characterization of the as cast microstructure. The investigated alloy was melted in a vacuum induction furnace and the vertically continuously cast. The rods with the diameter of 10 mm were investigated using light optical microscopy, scanning electron microscopy, transmission electron microscopy and energy dispersive X-ray spectroscopy. The microstructure consisted of the two-phase matrix (Ni-based solid solution and Ni3(Al,Ti)-precipitates), and a low melting eutectic. The contribution also discusses processes taking place during solification.
    Vir: Zbornik referatov 54. mednarodnega livarskega posvetovanja, Portorož 2014, Portorož,17.-19. september 2014 [Elektronski vir] = Conference proceedings Foundry Conference Portorož 2014, Portorož, 17.-19. september 2014 (Str. [1-6])
    Vrsta gradiva - prispevek na konferenci ; neleposlovje za odrasle
    Leto - 2014
    Jezik - angleški, slovenski
    COBISS.SI-ID - 18110486

Vnos na polico