Narodna in univerzitetna knjižnica, Ljubljana (NUK)
Naročanje gradiva za izposojo na dom
Naročanje gradiva za izposojo v čitalnice
Naročanje kopij člankov
Urnik dostave gradiva z oznako DS v signaturi
  • Effect of the bonding time on the microstructure and mechanical properties of a transient-liquid-phase bonded IN718 using a Ni-Cr-B filler alloy = Vpliv časa spajanja na mikrostrukturo in mehanske lastnosti spoja s prehodno tekočo fazo pri spajanju IN718 z uporabo zlitine Ni-Cr-B za spajanje
    Pouranvari, Majid ; Ekrami, Ali ; Kokabi, Amir Hossein
    The paper aims at addressing the effect of the bonding time on the metallurgical and mechanical properties of a transient-liquid-phase (TLP) bonded IN718 nickel-based superalloy using an Ni-15.2Cr-4B ... (%) amorphous filler alloy. The results showed that after a partial isothermal solidification, the residual liquid in the joint centerline transformed, during the cooling, to non-equilibrium eutectic-type microconstituents composed of Ni-rich boride, Cr-rich boride and eutectic g-solid solution phase. The complete isothermal solidification which resulted in a formation of an intermetallic-free joint centerline occurred after a holding period 40 min at the bonding temperature of 1100 °C. An increase in the bonding time improved the joint shear strength due to a decrease in the width of the eutectic-type microconstituents in the joint centerline.
    Vir: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 47, št. 5, sep.-okt. 2013, str. 593-599)
    Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasle
    Leto - 2013
    Jezik - angleški
    COBISS.SI-ID - 1018538

    Povezava(-e):

    http://mit.imt.si/Revija/
    Digitalna knjižnica Slovenije - dLib.si

vir: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 47, št. 5, sep.-okt. 2013, str. 593-599)

loading ...
loading ...
loading ...

Vnos na polico