Optimization of the process parameters for dry-sliding wear of an Al 2219-SiCp composite using the Taguchi-based grey relational analysis = Optimiranje procesnih parametrov pri suhi obrabi z drsenjem kompozita Al 2219-SiCp s Taguchijevo sivo relacijsko analizo
Ganesh, Radhakrishnan ...
This article focuses on an approach based on the Taguchi method with grey relational analysis for optimizing the process parameters for the dry-sliding wear of Al 2219-SiC particulate composites with ...multi-performance characteristics. The grey relational grade obtained with the grey relational analysis is used to optimize the process parameters. The optimum process parameters can then be determined with the Taguchi method using the grey relational grade as the performance index. The composite was fabricated via a powder-metallurgy route with the mass fractions of (10, 15 and 20) % and precipitated at (500, 550 and 600) °C. The dry-sliding-wear test was conducted on a pin-on-disc wear-testing machine for the normal loads of (10, 20 and 30) N and at disc speeds of (400, 500 and 600) r/min. The performance indicators of the wear test were the wear rate, the coefficient of friction, the friction force and the temperature rise of the pin. Further, optimization of the process parameters was performed using the Taguchi-based grey relational analysis followed by ANOVA to determine the percentage contributions of the process parameters to the wear performance of the composites. An L9 orthogonal array was used for the optimization study. The influences of individual process parameters on the wear performances of the composites are analyzed and presented in this study.
Bibliografsko gradivo je bilo uspešno dodano na polico.
Dodajanje bibliografskega gradiva na polico ni uspelo.
Gradivo je že na polici.
Trajna povezava
URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto
Faktor vpliva
Izdaja
Kategorija
Razvrstitev
JCR
SNIP
JCR
SNIP
JCR
SNIP
JCR
SNIP
Izberite knjižnično izkaznico:
Baze podatkov,
v katerih je revija indeksirana
Ime baze podatkov
Področje
Leto
Povezave do osebnih bibliografij avtorjev
Povezave do podatkov o raziskovalcih v sistemu SICRIS
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Citiranje
Funkcionalnost trenutno ni na voljo. Prosimo, poskusite kasneje.
Naročanje gradiva za izposojo v čitalnice
Naročanje kopij člankov
Urnik dostave gradiva z oznako DS v signaturi