Narodna in univerzitetna knjižnica, Ljubljana (NUK)
-
Tribology of CrAg7N coatings deposited on Vanadis 6 ledeburitic tool steel = Tribologija prevlek CrAg7N na ledeburitnem orodnem jeklu Vanadis 6Bílek, Pavel ...Samples made from Vanadis 6 PM ledeburitic tool steel were surface machined, ground and mirror polished. Prior to the deposition, they were heat treated to a hardness of 60 HRC. The CrAg7N coating ... was deposited with the magnetron-sputtering technique, using pure-Cr and Ag targets in a composite low-pressure nitrogen/argon atmosphere and at a temperature of 500 °C in the Hauzer Flexicoat 850 device. Tribological testing using a pin-on-disc apparatus was carried out at ambient and elevated temperatures: (300, 400 and 500) °C, respectively. Al2O3, 100Cr6 and CuZn balls were used as the counterparts. The wear tracks after the pin-on-disc testing were analyzed with scanning electron microscopy and a microanalysis. The experiments have shown a strong dependence of tribological parameters on the temperature. The friction coefficient of CrN-Ag against the 100Cr6 ball at ambient temperature was [mi] = 0.56. Tribological sliding tests of this coating system against the alumina balls indicate a decrease in the friction coefficient due to the increasing temperature. At ambient temperature [mi] = 0.68 and its minimum occurred at the temperature of 400 °C, [mi] = 0.24. This is attributed to the diffusion of Ag particles to the sliding top surface at elevated temperature. The testing against the CuZn brass ball generally gave a lower friction coefficient at ambient temperature, [mi] = 0.39. In contrast, the friction coefficient slightly increased with the increasing temperature and was practically constant at elevated temperatures, ranging between [mi] = 0.43-0.48.Vir: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 48, št. 5, sep.-okt. 2014, str. 669-673)Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasleLeto - 2014Jezik - angleškiCOBISS.SI-ID - 1084074
vir: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 48, št. 5, sep.-okt. 2014, str. 669-673)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Bílek, Pavel | |
Jurči, Peter | |
Hudáková, Mária | |
Čaplovič, L'ubomír | |
Novák, Michal |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema:
Naročanje gradiva za izposojo v čitalnice
Naročanje kopij člankov
Urnik dostave gradiva z oznako DS v signaturi