Narodna in univerzitetna knjižnica, Ljubljana (NUK)
-
Effect of the initial microstructure on the properties of low-alloyed steel upon mini-thixoforming = Vpliv začetne mikrostrukture na lastnosti malolegiranega jekla po predelavi mini-thixoformingMašek, Bohuslav ; Aišman, David ; Jirková, HanaThixoforming is an unconventional forming process based on semi-solid processing. Semi-solid processing involves heating the feedstock to a temperature at which it becomes partly liquid and partly ... solid. Thanks to partial melting and rapid solidification, unconventional microstructures can be obtained even in conventional materials. Today%s research efforts mainly involve high-alloyed steels with a wide freezing range at lower temperatures. By contrast, low-alloyed steels with the solidification temperatures above 1400 °C are not under extensive investigation. The main objective of the study was to find whether and how the attributes of the feedstock microstructure can be transmitted to the final semi-solid processed microstructure of the 30MnVS6 microalloyed steel. The first stage of the experiment involved mini-thixoforming of the as-received specimens of the steel. In order to assess the effects of the initial microstructure, specimens with three types of microstructure were prepared with high-pressure torsion (HPT), a severe-plastic-deformation (SPD) technique. Initial and final microstructures were examined using light and electron microscopes and image-analysis techniques. The phase composition was determined with the aid of the X-ray diffraction analysis. The mechanical properties were determined with tensile and hardness testing. Information on the local properties and the properties of microstructure constituents was obtained with microhardness measurement.Vir: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 48, št. 5, sep.-oct. 2014, str. 719-723)Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasleLeto - 2014Jezik - angleškiCOBISS.SI-ID - 1096106
vir: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 48, št. 5, sep.-oct. 2014, str. 719-723)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Mašek, Bohuslav | |
Aišman, David | |
Jirková, Hana |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema:
Naročanje gradiva za izposojo v čitalnice
Naročanje kopij člankov
Urnik dostave gradiva z oznako DS v signaturi