Narodna in univerzitetna knjižnica, Ljubljana (NUK)
-
The effect of firing conditions on the characteristics of thick-film resistors for temperature sensors = Vpliv pogojev žganja na lastnosti debeloplastnih uporov za temperaturneRepič, Barbara ; Belavič, Darko ; Kuščer, Danjela: An integrated miniature electrochemical sensor (ES) that offers rapid, sensitive, and selective detection of chemical and biological contaminants in a variety of samples requires temperature ... control to work accurately. To address this, one approach is to locate temperature sensor (TS) next to the ES components. However, this integration poses a challenge as different firing processes are required for the sensor components and the TS. Commercially available thick-film materials for the realisation of TS are designed for screen printing on alumina and firing in air at 850 °C for 10 minutes. However, a key component of an ES, a carbon-based working electrode, must be fired in an oxygen-lean atmosphere. In this study, we investigated the influence of the firing atmosphere, i.e., air and argon, on the characteristics of thick-film resistors, including thickness, roughness, phase composition, resistivity, and temperature dependence. For the study, we used two commercially available thick-film pastes, NTC2114 and NTC2113, as TS with nominal sheet resistivities of 10 kΩ/sq and 1 kΩ/sq at 25 °C, respectively. Using X-ray powder diffraction analyses, we detected RuO2 and spinel phases in the samples heated at 850 °C in air. However, when the samples were fired in argon, we detect metallic ruthenium and alloys. As a result of these changes, the resistivity of the NTC2114 and NTC2113 increased significantly. However, despite these changes, the relative resistance and the coefficient of temperature sensitivity did not vary significantly, indicating the suitability of these materials as TS. These findings have important implications for the future integration of TS into various screen-printed ES systems, fostering the design and development of systems with enhanced accuracy and reliability in temperature measurements.Vir: Informacije MIDEM : časopis za mikroelektroniko, elektronske sestavne dele in materiale = časopis za mikroelektroniku, elektronske sastavne dijelove i materijale = journal of microelectronics, electronic components and materials. - ISSN 0352-9045 (Vol. 54, no. 1, 2024, str. 17-24)Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasleLeto - 2024Jezik - angleškiCOBISS.SI-ID - 187955459
Avtor
Repič, Barbara |
Belavič, Darko |
Kuščer, Danjela
Teme
debele plast |
sitotisk |
temperaturni senzor
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Repič, Barbara | 55725 |
Belavič, Darko | 08346 |
Kuščer, Danjela | 13369 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema:
Naročanje gradiva za izposojo v čitalnice
Naročanje kopij člankov
Urnik dostave gradiva z oznako DS v signaturi