Narodna in univerzitetna knjižnica, Ljubljana (NUK)
-
Effect of blade coating on a centrifugal pump operation under sediment-laden water flowWang, Yong, strojnik ...Applying a high strength coating on a blade's surface could significantly prolong the service life of a centrifugal pump under sediment-laden water flow because of its protection. To explore the ... effect of blade coating, the characteristics of energy, vibration and pressure fluctuation of a centrifugal pump (the specific speed (ns) is 81.46) with different polyurethane coating thickness coefficients were experimentally studied under sediment-laden water flow. Keeping the blade outlet angle, blade inlet angle and blade shape unchanged, the head H and efficiency [eta] under both sediment-laden flow and clear water flow decrease significantly as the coating thickness coefficient increases. The axis rotating frequency and blade passing frequency are the main excitation frequencies of the pump vibration velocity amplitude and outlet pressure fluctuation. The vibration velocity amplitude and outlet pressure fluctuation at the frequency of 1 BPF are the largest. At the frequency of 1 axis rotating frequency, they are the second in all cases. The peak values of both vibration velocity amplitude and outlet pressure fluctuation are proportional to the coating thickness coefficient. An analysis was performed for several increasing coating thicknesses, corresponding to coating coefficients from K0 to K3. When the coating thickness coefficients are K0, K1, and K2, the peak value of vibration velocity amplitude under sediment-laden flow is larger than that under clear water flow, but the very small difference between them undercoating thickness coefficient K3. The peak values of pressure fluctuations under different flow rates decrease first and then increase with the increasing coating thickness coefficient, and lowest points are all located at the coating thickness coefficient K1Vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 66, no. 10, Oct. 2020, str. 591-601, SI 74)Vrsta gradiva - članek, sestavni delLeto - 2020Jezik - angleškiCOBISS.SI-ID - 33660163
![loading ... loading ...](themes/default/img/ajax-loading.gif)
vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 66, no. 10, Oct. 2020, str. 591-601, SI 74)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Wang, Yong, strojnik | ![]() |
Zhang, Zilong | ![]() |
Chen, Jie, elektrotehnika | ![]() |
Liu, Houlin | ![]() |
Zhang, Xiang | ![]() |
Hočevar, Marko, strojnik, 1972- | 18836 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema:
Naročanje gradiva za izposojo v čitalnice
Naročanje kopij člankov
Urnik dostave gradiva z oznako DS v signaturi