Narodna in univerzitetna knjižnica, Ljubljana (NUK)
-
Fracture toughness of the vacuum-heat-treated spring steel 51CrV4 = Lomna žilavost vakuumsko toplotno obdelanega vzmetnega jekla 51CrV4Senčič, Bojan ; Leskovšek, VojtehIn the work the possibilities of the vacuum heat treatment of spring steel grade 51CrV4 are presented. Charpy-V notch (CVN) impact-test values are widely used in toughness specifications for spring ... steels, even though the fracturing energy is not directly related to the spring design. The plain-strain stress-intensity factor (KIc) at the on set of unstable crack growth can be related to the spring design; however, KIc values are not used in the toughness specifications. This is surprising since to the designer KIc values are more useful than CVN values, because the design calculations for springs from high-strength steels should also take into account the strength and the toughness of materials to prevent rapid and brittle fracture. An investigation was conducted to determine whether standardized fracture-toughness testing (ASTM E399-90), which is difficult to perform reliably for hard and low ductility materials, could be replaced with a non-standard testing method using circumferentially notched and fatigue-precracked tensile specimens. The results of this investigation have shown that using the proposed method it was possible to draw, for the normally used range of working hardness, combined tempering diagrams (Rockwell-C hardness - Fracture toughness KIc - Tempering temperature) for the vacuum-heat-treated spring steel grade 51CrV4. Fractographic and metallographic analyses of the KIc-test specimens used shows in steel the presence of positive and negative segregations. It was found that the width of the segregations bands and the distance between the positive and negative segregations influence significantly the fracture toughness due to the presence of bainite in the negative segregations.Vir: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 45, št. 1, jan.-feb. 2011, str. 67-73)Vrsta gradiva - članek, sestavni delLeto - 2011Jezik - angleškiCOBISS.SI-ID - 851370
Avtor
Senčič, Bojan |
Leskovšek, Vojteh
Teme
vzmetno jeklo |
vakuumska toplotna obdelava |
trdota |
lomna žilavost |
mikrostruktura
vir: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 45, št. 1, jan.-feb. 2011, str. 67-73)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Senčič, Bojan | 18782 |
Leskovšek, Vojteh | 07642 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema:
Naročanje gradiva za izposojo v čitalnice
Naročanje kopij člankov
Urnik dostave gradiva z oznako DS v signaturi