Narodna in univerzitetna knjižnica, Ljubljana (NUK)
Naročanje gradiva za izposojo na dom
Naročanje gradiva za izposojo v čitalnice
Naročanje kopij člankov
Urnik dostave gradiva z oznako DS v signaturi
  • Weldability of metal matrix composite plates by friction stir welding at low welding parameters = Varivost plošč kompozita s kovinsko osnovo po vrtilno tornem postopku pri nizkih varilnih parametrih
    Bozkurt, Yahya
    Metal matrix composites (MMCs) are engineering materials that their increasingly replacing of a number of conventional materials in automotive, acrospace, and sports industries is driven by the ... demand for lightweight, high specific strength and stiffness. Their wide application as structural materials needs proper development of suited joining processes. Friction stir welding (FSW) is a fairly new solid state welding process for joining metals using thermal energy produced from localized friction forces. In this study, the weldability of AA2124 containing (volume fractions) 25 % of SiC particles with T4 heat treated aluminum MMC plates was investigated at low welding parameters by FSW process. Microstructure, ultimate tensile strength, surface roughness and microhardness determination have been carried out to evaluate the weld zone characteristics of friction stir welded MMC plates. The FSW specimens were tested without post-weld heat treatment or surface modification. The temperature dissipation at the distance of 15 mm from the weld center was also measured using K-type thermocouples to demonstrate the FSWed joining without melting. Because of microstructural modification, improvement of microhardness of the stir zone was observed in comparison to the base composite. Ultimate tensile tests indicated a joint efficiency of approximately 73 %.
    Vir: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 45, št. 5, sep.-okt. 2011, str. 407-412)
    Vrsta gradiva - članek, sestavni del
    Leto - 2011
    Jezik - angleški
    COBISS.SI-ID - 880554

    Povezava(-e):

    Digitalna knjižnica Slovenije - dLib.si

vir: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 45, št. 5, sep.-okt. 2011, str. 407-412)

loading ...
loading ...
loading ...

Vnos na polico