Narodna in univerzitetna knjižnica, Ljubljana (NUK)
Naročanje gradiva za izposojo na dom
Naročanje gradiva za izposojo v čitalnice
Naročanje kopij člankov
Urnik dostave gradiva z oznako DS v signaturi
  • Structural, thermal and magnetic properties of barium-ferrite powders substituted with Mn, Cu or Co and X (X = Sr and Ni) prepared by the sol-gel method = Strukturne, termične in magnetne lastnosti prahov barijevega ferita, nadomeščenih z Mn, Cu ali Co in X (X = Sr in Ni), pripravljenih po sol-gel metodi
    Gurbuz, Aylin ...
    In this study, Ferrite A (undoped barium hexaferrite), Ferrite B (MnCuNi-dopedbarium hexaferrite), Ferrite C (MnCuSr-doped barium hexaferrite),Ferrite D (MnCoNi-doped barium hexaferrite) and Ferrite ... E (MnCoSr-doped barium hexaferrite) powders were prepared by sol-gel processing. The produced powders were calcined at 550 °C for 6 h and sintered at 1000 °C for 5 h to obtain the required phases. The powders were characterized by differential thermal analysis/thermogravimetric analysis (DTA/TG), X-ray diffractometry (XRD) and scanning electron microscopy (SEM), and vibrating-sample magnetometry (VSM). The XRD patterns indicated that the pure barium ferrite phase was not obtained. The presence of M-type BaFe11.6Mn0.4O19 was confirmed in the Ferrite B and Ferrite D patterns. In the Ferrite C pattern, there were the phases of BaFe12O19, Ba2Cu2Fe12O22 (X or Z-type) and Sr3Fe2O6.16. The Ba0.5Sr0.5Fe12 phase was easily observed in the Ferrite E pattern. The results showed that the dopant materials significantly change the particle shape of Ferrite A powders, but also lower the value of the coercivity. A higher saturation magnetization was observed for the Ferrite D powder.
    Vir: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 46, št. 3, maj-jun. 2012, str. 305-310)
    Vrsta gradiva - članek, sestavni del
    Leto - 2012
    Jezik - angleški
    COBISS.SI-ID - 935338

vir: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 46, št. 3, maj-jun. 2012, str. 305-310)

loading ...
loading ...
loading ...