Narodna in univerzitetna knjižnica, Ljubljana (NUK)
Naročanje gradiva za izposojo na dom
Naročanje gradiva za izposojo v čitalnice
Naročanje kopij člankov
Urnik dostave gradiva z oznako DS v signaturi
  • Optimization of multi-process parameters according to the surface quality criteria in the end milling of the AA6013 aluminum alloy = Optimizacija multiprocesnih parametrov v odvisnosti od kakovosti površine kot merila pri končnem rezkanju aluminijeve zolitine AA6013
    Durmuş, Hülya
    In the study the effects of multi-process parameters on the surface roughness during the machining of the AA6013 aluminum alloy with non-coated cemented carbide milling cutters were investigated by ... using Taguchi's experimental design method. Experiments were conducted on the basis of Taguchi's L16 orthogonal array (OA) at different levels of the factors relating to the aging process, the cutting speed, the feed rate, the axial depth of a cut and the radial depth of a cut; then they were evaluated through the signal/noise ratio (S/N), ANOVA and the main effects' graphic. Accordingly, the lowest surface roughness was estimated to be 0.436 m and, finally, Taguchi's method allowed the optimization of the system for the verification of the tests.
    Vir: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 46, št. 4, jul.-avg. 2012, str. 383-388)
    Vrsta gradiva - članek, sestavni del
    Leto - 2012
    Jezik - angleški
    COBISS.SI-ID - 937386

    Povezava(-e):

    http://www.imt.si/Revija/
    Digitalna knjižnica Slovenije - dLib.si

vir: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 46, št. 4, jul.-avg. 2012, str. 383-388)

loading ...
loading ...
loading ...

Vnos na polico